Select Language:
If you’re looking to upgrade or replace the M.2 drive in your HP Pavilion x360 – 15-bk152sa, this guide will walk you through the steps to do it easily and safely. Whether you’re expanding your storage or replacing a faulty drive, it’s important to handle the process carefully to avoid any damage.
First, make sure your laptop is turned off and unplugged from any power source. To start, remove the screws on the back panel of your laptop. You may need a small Phillips screwdriver for this. Gently pry open the back cover after removing the screws. Be careful not to force it—use a plastic pry tool if necessary to avoid damaging the clips.
Once the back panel is off, locate the M.2 drive slot. It will look like a small connector with a screw securing the drive in place. If you’re replacing an existing drive, carefully unscrew and remove the old M.2 drive. Take note of how it’s installed so you can insert the new one correctly.
To install the new M.2 drive, align it with the connector at a slight angle, usually about 30 degrees. Carefully press it down flat against the slot, then secure it with the screw you removed earlier or a new screw if needed. Make sure it’s firmly seated and stable.
After that, reattach the back panel and tighten all screws to make sure everything is secured properly. Plug your laptop back in and power it on. Your system should automatically recognize the new drive. If you’re installing a new OS or need to format the drive, do so through your system’s disk management settings.
Remember, always handle your components carefully to avoid static damage. If you’re unsure about removing or installing hardware yourself, consider seeking professional help. With these simple steps, you can upgrade your HP Pavilion x360’s M.2 drive and enjoy more storage or improved performance.
ChatGPT
Perplexity
Gemini AI
Grok AI
