How to Easily Install RAM on Your Windows Laptop: A Step-by-Step Guide

How to Easily Install RAM on Your Windows Laptop: A Step-by-Step Guide How to Easily Install RAM on Your Windows Laptop: A Step-by-Step Guide
Quick Tips
  • Check that your new RAM is compatible > power off the laptop > unplug all connected devices.
  • Carefully remove the back cover of the laptop > insert the RAM into the vacant slot > press down until the clips snap into place > replace the laptop cover.
  • Access Task Manager > navigate to the Performance tab > select Memory > verify the amount of available RAM.

Upgrading Your Laptop’s RAM Made Easy

If your laptop has an available RAM slot, enhancing its memory capacity is a straightforward task. After securing compatible RAM, you’ll want to power down your laptop and disconnect all peripherals. Follow these steps to successfully complete the upgrade:

Step 1: Turn your laptop upside down and place it on a soft surface. Use a screwdriver to carefully remove all screws.


Step 2: Insert a card or a thin plastic tool into the gap and gently pry the back cover open.

open the back

Step 3: Find the empty RAM slot, typically located right above or next to the existing RAM module.

locate the RAM slot 1

Step 4: Take your new RAM stick and insert it at a slight angle until the notch aligns with the slot. Make sure it’s fully inserted.

insert the ram

Next, press down on the RAM until you hear the clips click into place. Replace the back cover, ensuring it’s snug against the body of the laptop. Secure it by tightening the screws, flip your laptop back over, and you’re done!

Also Read: How to Check RAM Speed on Windows 11

Verifying Your Laptop’s RAM Upgrade

After completing the RAM installation, you can confirm the upgrade’s success using Task Manager. This ensures your new memory is recognized and actively being used. Here’s how:

Step 1: Launch Task Manager and head to the Performance tab, then select Memory.

Step 2: Check the available RAM displayed. You can also view how many slots are occupied.

check if RAM is installed

If you successfully added more memory, it should show as 2 of 2 or 2 of 4, dependent on your available slots. If it doesn’t show up, consider troubleshooting the RAM installation.

Thank you for your feedback!

Add a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.