Select Language:
If you’re looking to upgrade your HP Envy 17 series laptop’s hard drive, you’ll need to get the right hardware kit. Here’s a step-by-step guide to help you through the process.
First, you need to purchase the Hard Drive Hardware Kit, with the part number 720237-001. This kit contains all the necessary components for a smooth installation. You can find it by searching for the part number online, which will lead you to various resellers.
Here are two useful links to get you started:
-
If you only need the cable, you can find it here: 720237-001 SATA Cable.
ADVERTISEMENT - For the complete hardware kit, visit this link: Complete Hard Drive Kit.
Once you have your kit, follow these steps:
-
Gather Your Tools: Make sure you have a screwdriver and any other tools specified in the kit instructions.
-
Power Down and Unplug: Before starting, shut down your laptop and unplug it from any power source.
-
Open the Laptop: Carefully remove the back cover to access the hard drive area. Consult your laptop’s manual for specific instructions on how to do this.
-
Install the New Hard Drive: Follow the instructions included in your hardware kit to install the new hard drive. Make sure everything is securely connected.
-
Reassemble the Laptop: Once the hard drive is installed, replace the back cover and screw it in place.
- Power On the Laptop: Plug in your laptop, turn it on, and check to make sure that the new hard drive is recognized.
By following these steps, you should be able to upgrade your hard drive successfully. If you found this guide helpful, don’t forget to mark it as a solution or click ‘yes’ if it worked for you!
Add us on ChatGPT
Add us on Perplexity
