How to Upgrade Your HP 255 G8 SSD to NVMe (Is It Compatible?)

Select Language:

If you’re looking to improve your HP 255 G8 laptop’s speed and performance, upgrading the SSD is a great solution. Here’s a simple step-by-step guide to help you swap out your current drive for a faster, larger SSD.

First, shut down your laptop and unplug it from any power source. Remove the battery if it’s removable to avoid any risk of electrical shock. Next, locate the small panel on the back of your laptop that covers the storage drive. Use a screwdriver to carefully remove the screws securing this panel. Once removed, you’ll see the existing SSD or hard drive installed inside.

Gently disconnect the drive by removing any screws holding it in place, then carefully slide it out of its connector. Take your new SSD—make sure it’s compatible with your laptop—and connect it to the same slot. Secure it with screws if needed.

Before closing everything up, it’s a good idea to install your operating system onto the new SSD. You can do this with a bootable USB drive containing your preferred OS. Insert the USB, power on your laptop, and follow the on-screen instructions to install or restore your system onto the new drive.

Once the installation is complete, put the back panel and screws back on your laptop. Reattach the battery if you removed it earlier. Power on your laptop—your computer should now boot faster and run smoother with the upgraded SSD.

This simple upgrade can significantly boost your HP 255 G8’s performance, helping you work more efficiently and enjoy quicker load times. Just follow these easy steps, and you’ll have a faster, more responsive laptop in no time.