Select Language:
Thinking about upgrading your RAM to boost your computer’s performance? If you’re considering the 14s-dq3124TU (B18PHPA) model, here’s a simple guide to help you do it step by step.
First, turn off your laptop and unplug all cables. Wait a few seconds, then carefully remove the battery if it’s removable. This helps prevent any accidental damage during the upgrade.
Next, locate the RAM compartment. Usually, there’s a small panel on the bottom of the laptop held in place by screws. Use a small screwdriver to open this panel. Keep the screws in a safe place so you won’t lose them.
Once the compartment is open, you’ll see the existing RAM modules. To remove the current RAM, gently spread the clips on each side of the module. The RAM should pop up at an angle. Carefully pull it out and set it aside.
Now, take your new RAM module and align it with the slot. Make sure the notch on the module lines up with the key in the socket. Firmly press the RAM down into the slot and then push down gently until the clips snap into place.
After installing the new RAM, replace the cover panel and screw it back in. Reinsert the battery if you removed it earlier, then plug your laptop back in and turn it on.
Your computer should automatically recognize the new memory during startup. To double-check, go into your system’s settings or control panel to see if the total RAM has increased. If everything looks good, you’ve successfully upgraded your RAM!
Remember, if you’re unsure or uncomfortable performing this upgrade yourself, it’s always best to get help from a professional. Upgrading your RAM can give your laptop a noticeable boost, making everything run smoother and faster.
ChatGPT
Perplexity
Gemini AI
Grok AI
