How to Locate and Replace the CMOS Battery in HP x360

Select Language:

If you’re dealing with an HP x360 – 11-p110nr that won’t boot due to a BSOD (Blue Screen of Death) and a CMOS error, you’re not alone. This issue can be frustrating, especially when you want to replace the CMOS battery but can’t find it even after disassembling your laptop. Here’s a straightforward guide to help you address this problem effectively.

First, let’s clarify what a CMOS battery does. This battery maintains your computer’s BIOS settings and keeps the date and time accurate. When it malfunctions, it can trigger errors that prevent your laptop from booting up properly.

Step-by-Step Solution

1. Gather the Necessary Tools: Before you start, make sure you have a Phillips screwdriver, plastic prying tools, and a new CMOS battery compatible with your HP model.

2. Power Down Your Laptop: Always ensure that your laptop is turned off and unplugged from any power source. If possible, remove the battery as well.

3. Open the Laptop:

   • Use your Phillips screwdriver to remove the screws on the back panel of your HP x360.
   • Carefully use a plastic prying tool to detach the panel from the body. Work around the edges gently to avoid damaging the clips.

4. Locate the CMOS Battery:

   • Once the back panel is removed, visually inspect the motherboard. The CMOS battery looks like a small, round, silver coin.
   • In some models, the CMOS battery might be mounted in a holder or directly soldered to the motherboard. If it’s secured in a holder, carefully lift it out.

5. Replace the CMOS Battery:

   • Take your new CMOS battery and place it into the holder or solder it in, depending on its setup.
   • Ensure it’s seated properly to maintain a good connection.

6. Reassemble Your Laptop:

   • Once the new battery is in place, slide the back panel back onto the laptop.
   • Reinsert and tighten all the screws to secure the panel.

7. Power On and Check Settings:

   • Plug in your laptop and turn it on.
   • Enter the BIOS setup (commonly by pressing F2 or F10 as it boots) to adjust any settings if necessary.
8. Verify the Fix:
   • Ensure that your laptop boots up normally and that any previous error messages have disappeared. If it’s still not working, consider further troubleshooting steps like reinstalling your operating system or checking other hardware components.

Conclusion

Replacing the CMOS battery in your HP x360 – 11-p110nr can alleviate boot issues caused by CMOS errors. Following these steps can help you successfully replace the battery and get your laptop back up and running. If the problem persists, you may need to consult a professional or refer to HP’s customer support. Remember, taking care while disassembling and reassembling your device can save you further headaches down the road. Good luck!

Add us on ChatGPT Add us on Perplexity