How to Confirm M.2 SSD Compatibility with Your HP Victus Laptop

Select Language:

If you’ve recently acquired a Victus by HP 16.1-inch Gaming Laptop and are looking to upgrade your storage, you’re in the right place! This guide will walk you through the process of installing a PCIe Gen 4 x 4 SSD, specifically focusing on the Samsung 990 Pro model.

First things first, you’ll want to get your hands on the maintenance and service guide for your laptop. This document is an invaluable resource that contains detailed information about your device, including compatible SSDs. You can find the guide here.

Once you have the guide, let’s summarize the most important points for your upgrade:

Confirm Compatibility: According to Chapter 1 of the service manual, your Victus laptop supports PCIe Gen 4 x 4 SSDs like the Samsung 990 Pro. This is crucial as using compatible hardware ensures optimal performance.
Understand Thermal Housing: Before you proceed, it’s essential to note that due to the laptop’s design, specifically mentioned in Chapter 5, page 33 of the manual, the SSD will be housed in a thermal compartment. This means using an SSD with a heatsink is not advisable, as it might not fit properly within the tight confines of this housing.
Gather Your Tools: Before diving into the installation, make sure you have the necessary tools. You’ll typically need a small screwdriver to open your laptop and possibly some anti-static gloves to protect your components.
Install the SSD:
- Power off your laptop and unplug it from any power source.
- Open the back panel by carefully removing the screws. Keep them in a safe place so you can reassemble later.
- Locate the M.2 slot where the SSD will be installed. Remember, it’s essential to be gentle to avoid damaging anything inside the laptop.
- Align the SSD with the M.2 connector and insert it at an angle, then press it down flat. Secure it using the screw that holds it in place.
Reassemble and Boot Up: Once the SSD is secured, carefully replace the back panel of your laptop and screw it back on. Connect your power source and turn on your laptop.
Configure Your SSD: Once booted up, you may need to format the new SSD before you can start using it. Go to your computer’s disk management tool to initialize and format the new drive.

By following these steps, you should confidently upgrade your Victus by HP laptop with the Samsung 990 Pro SSD. This upgrade can significantly enhance your gaming experience, allowing for faster load times and better overall performance. Happy gaming!