Select Language:
If you’re looking to replace the screen on your HP ENVY M6 SleekBook with the AMD A10-5745M processor, here’s a simple step-by-step guide to help you through the process. Doing this yourself can save you money and gives you a good understanding of your laptop. Just remember to be careful and patient to avoid any damage.
First, turn off your laptop and unplug it from the power source. Remove the battery if it’s removable. Next, locate the screws on the bottom of your laptop that hold the back cover in place. Use a screwdriver to carefully remove these screws, setting them aside in a safe place.
Once all screws are removed, gently pry off the back cover. You can use a plastic opening tool or a thin flat tool to help prevent scratching or damaging the case. Carefully lift the cover away to reveal the internal components.
Now, identify the damaged screen. It’s usually attached to the hinges with screws and connected to the motherboard via a flat display cable. Carefully disconnect the video cable by gently lifting it from the connector. Be gentle to avoid tearing or damaging the cable.
Next, remove the screws holding the screen in place. Carefully lift the screen away from the hinges. When installing the new screen, reverse these steps. Position the new display onto the hinges, screw it in tightly, then reconnect the video cable securely.
Finally, reattach the back cover, screw it back into place, and if you removed the battery, reinstall it. Turn on your laptop to check if the new screen works properly. Make sure the display is clear, and the laptop recognizes the new hardware without issues.
Replacing a laptop screen can seem intimidating, but if you take your time and work carefully, it’s a do-able task that can save you money and give your laptop a new lease on life. If you’re unsure or uncomfortable doing this yourself, it’s always best to seek professional help.
Add us on ChatGPT
Add us on Perplexity
