How to Identify and Replace a Screen in the HP 24 df 1224 All-in-One

Select Language:

If you’re planning to replace the screen on an all-in-one computer like the 24 df 1224 model, here are some simple steps to help you do it successfully.

First, before starting, check if the screen is a touchscreen. If you’re unsure, look for any markings or model numbers on the display. In this case, the screen is labeled LM238WF5. Remember, ordering the wrong screen can be frustrating, so double-check the model number.

Next, turn off the computer and unplug it from the power source. To avoid accidental damage, it’s a good idea to disconnect all cables and peripherals.

Carefully remove the back panel of the computer. Usually, this involves unscrewing several screws around the edges. Keep these screws safe because you’ll need them later.

Once the back is open, locate the screen’s connector. Usually, it is secured with a ribbon cable or a connector clip. Gently disconnect this cable, being careful not to pull on it too hard.

With the connector free, gently lift out the damaged screen. If it feels stuck, check for any additional screws or clips that might be holding it in place.

Prepare the new screen by removing it from its packaging and connecting it to the existing connectors. If it has a protective film, leave it on until you’re done assembling everything.

Place the new screen into the frame, making sure it fits snugly. Reconnect the cable securely, then reattach any screws or clips that hold it in place.

Finally, put the back panel back on the computer and screw everything back together. Plug in your computer, turn it on, and check that the new screen works properly.

Remember, if you’re not comfortable doing this yourself, a professional repair service can handle it. Replacing a screen can be straightforward if you follow these steps carefully, but safety and patience are key.