If you’re looking to replace the black cartridge on your HP Photosmart 7720 printer, you’re in the right place. Installing a new cartridge might seem a bit daunting if you’ve never done it before, but with a few simple steps, you can have your printer up and running quickly. Here’s how to fit a new black cartridge in your Photosmart 7720.
First, gather your materials. You’ll need your new black ink cartridge and possibly a lint-free cloth for handling the cartridge safely.
-
Prepare the Printer: Start by turning on your HP Photosmart 7720 printer. Make sure it’s plugged in and powered up. This will make it easier for the printer to recognize the new cartridge.
-
Open the Printer Cover: Gently lift the front cover of the printer. This will reveal the cartridge access area. You might hear some sounds as the printer moves the cartridge carriage to the center for easy access.
-
Remove the Old Cartridge: If there’s an existing cartridge in place, carefully remove it first. To do this, press down on the cartridge you want to replace until it clicks. You can then pull it out straight towards you. Be careful not to touch the copper contacts or the ink nozzles to avoid any issues.
-
Prepare the New Cartridge: Take your new black cartridge and remove it from its packaging. Make sure to avoid touching the copper contacts or the ink nozzles. Some cartridges may have protective tape over the ink nozzle — be sure to remove this tape before installation.
-
Install the New Cartridge: Slide the new cartridge into the empty slot. Ensure that it’s aligned correctly and push it into place until you hear a click. Make sure it’s secure; you don’t want it to move around when the printer is in use.
-
Close the Printer Cover: Once you’ve installed the new cartridge, gently lower the printer cover back into place. This will allow the printer to recognize the new cartridge and set it up for use.
- Run a Test Page: After you’ve replaced the cartridge, it’s a good idea to run a test print. You can do this from the printer’s control panel by selecting the option for printing a test page or alignment page. This will ensure that the new cartridge is installed correctly and working properly.
By following these steps, you should have successfully fitted a new black cartridge in your HP Photosmart 7720 printer. Just remember to handle the cartridges carefully and keep your printer clean to ensure it runs smoothly. Happy printing!